Shopping.co.uk

Lambda Sensor - Febi 177447

Lambda Sensor - Febi 177447

The Febi 177447 Lambda Sensor is a high-quality replacement part designed for reliable performance...

Best current price£76.30from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£76.30Visit shop

Lambda sensor Heated 177447 FEBI BILSTEIN for SKODA BMW VW MERCEDES-BENZ AUDI

Visit shop

All Offers

10 offers from £76.30 - £86.71

View price history by clicking the chart icon.

eBayLambda sensor Heated 177447 FEBI BILSTEIN for SKODA BMW VW MERCEDES-BENZ AUDI
Free delivery in 1–3 days
£76.30
Visit shop

Product Information

Full details

The Febi 177447 Lambda Sensor is an essential component for automotive enthusiasts and DIY mechanics looking to maintain efficient engine operation. It is designed to provide precise oxygen level monitoring in exhaust systems, ensuring the engine control unit receives accurate data for optimal fuel-to-air ratios; however, users must verify specific vehicle compatibility via the manufacturer's part lookup to avoid fitment errors.

All features

Model Part Number177447
BrandFebi

Extended Product Information

FAQs

How often should a lambda sensor be replaced?

While there is no fixed interval, most sensors show signs of degradation between 60,000 and 100,000 miles.

Can I use lubricants on the sensor tip?

No. The tip must remain clean; oils or lubricants will contaminate the sensor and cause it to fail immediately.

Does the wire length matter for fitment?

Yes. If the 907 mm cable is too short for your vehicle, the sensor will not reach the harness connection, leading to potential damage.

Why is the spanner size 22mm important?

Using the correct size ensures you can apply the necessary torque without rounding off the sensor hex nut.

Is this a universal sensor?

No, while it uses a standard thread, the internal electronics are tuned for specific vehicle requirements. Always check compatibility.

Troubleshooting

Check Engine Light remains on after installation

Use an OBD-II scanner to clear existing error codes, as the ECU may not automatically detect the new part.

Sensor signal is erratic or slow to respond

Check the wiring harness for corrosion or loose pins at the connector point.

Difficulty threading the sensor

Ensure the threads on the exhaust manifold are clean and free of carbon buildup before inserting the new sensor.

Pros and Cons

Pros

  • High-grade heat resistance
  • Fast activation due to integrated heating
  • Reliable, consistent sensor data
  • Easy installation with standard 22mm tooling

Cons

  • Compatibility requires strict verification
  • Fragile ceramic tip must be handled with care
  • Requires professional diagnostic tools for error code clearing

Setup, Compatibility & Care

To install the sensor, wait for the engine and exhaust system to cool completely to prevent skin burns. Locate the old sensor, disconnect the wiring harness, and use a 22mm sensor socket to unscrew it. When installing the Febi 177447, ensure the anti-seize compound (often pre-applied to the threads) is intact and do not touch the sensor tip with bare fingers, as oils can degrade performance. Thread the sensor by hand first to avoid cross-threading, then tighten to the manufacturer's specified torque. Always clear stored ECU fault codes using an OBD-II scanner after the physical replacement is complete.

Price History

DatePrice
Visit shop