Schneider Electric Mounting Plate - NSYMM32

The NSYMM32 mounting plate has a maximum load capacity of 60kg.

This plate is designed for use with Schneider Electric Spacial CRN, S3D, S3X, and PLM enclosure series.

While the plate is solid steel, drilling additional holes is possible but not recommended as it can compromise structural integrity and corrosion resistance. It's best to utilize the existing mounting capabilities.

The dimensions are 300mm in height and 200mm in width.

The mounting plate itself does not typically include screws or nuts for component mounting or for attaching to the enclosure's rear studs. These should be sourced separately based on your specific installation needs.

Clean the surface with a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents that could damage the protective galvanized coating.

Verify that the enclosure is a compatible Spacial series (CRN, S3D, S3X, PLM) and that the plate's 300x200mm dimensions are correct for the enclosure model. Ensure internal mounting channels are clear of obstructions.

Check that the correct mounting hardware (screws, washers, nuts) is used for both the plate-to-enclosure connection and the component-to-plate connection. Ensure M8 mounting studs are fully engaged if using direct mounting.

Inspect for damage during handling or installation. Minor scuffs can be buffed. For significant damage that compromises corrosion resistance, consider protective coatings if appropriate for the environment.