Best current price£14.99from AWD-IT.co.uk
Shopping.co.uk recommended and popular offers
AWD-IT.co.uk£14.99Visit shop Havn White H12 120Mm Performance Cooling Fan, High Static Pressure, Pwm - Coo-Hvn-05838
Visit shop2 offers from £14.99 - £20.98
View price history by clicking the chart icon.
The HAVN H12 120mm Performance Fan is designed for PC enthusiasts and system builders aiming for high-efficiency cooling in white-themed aesthetics. It provides a robust balance of 72.44 CFM airflow and 3.01 mmH2O static pressure, making it ideal for both radiator setups and chassis ventilation; however, users should note that its specialized design is optimized for specific performance cooling rather than extreme low-noise output at maximum RPM.
| Colour | White |
|---|---|
| Model Part Number | HVN-FS-H1230-01 |
| Brand | HAVN |
Yes, standard mounting hardware is included for immediate installation into most PC cases.
Absolutely, the HAVN H12 is versatile and functions well as either an intake or exhaust fan.
It allows the fan to stop spinning entirely during low-load tasks, reducing system noise and extending the lifespan of the fan bearing.
While it can connect to a 3-pin header, you will lose the PWM speed control functionality, and the fan will run at a fixed speed.
Use a dry or slightly damp microfiber cloth to gently wipe down the surface. Avoid harsh chemical solvents.
Check your specific fan configuration; it is recommended to use a powered fan hub if connecting multiple fans to a single motherboard header to avoid overloading the port.
Verify that the PWM cable is securely connected to a 4-pin motherboard header and check BIOS settings to ensure the port is not set to a permanent 0% duty cycle.
Access your motherboard BIOS and set the fan header control mode to 'PWM' rather than 'DC' or 'Voltage' mode.
Ensure no cables are touching the fan blades and check that the mounting screws are tightened evenly to prevent vibration.
Installation requires standard case fan mounting hardware and a 4-pin PWM header on your motherboard or fan controller hub. Ensure the fan orientation matches your desired airflow direction, typically indicated by arrows on the side of the housing. For maintenance, power down your system and use a can of compressed air or a soft microfiber cloth to remove dust from the blades and the intake frame periodically. Avoid using liquid cleaners on the plastic components to prevent staining or material degradation.
