Cre8audio Assembler - C8-3001014
Best current price£277.85from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£277.85Visit shop Cre8audio Assembler Vintage Analogue Audio Mixer
Visit shopeBay£277.85Visit shop One Offer
1 offer from £277.85
View price history by clicking the chart icon.
Product Information
Full details
The Cre8audio Assembler is designed for studio-based electronic musicians and synth enthusiasts who need a dedicated hub for their hardware synthesizers and Eurorack systems. Developed with Pittsburgh Modular Synthesizers, it offers the character and warmth of classic analogue consoles while maintaining a footprint optimized for modern desktop setups. While it provides an exceptional tactile mixing experience, users should note that it lacks traditional microphone preamps, making it strictly an instrument-level utility for line-level signals.
All features
| Model Part Number | C8-3001014 |
|---|---|
| Brand | Cre8audio |
Extended Product Information
FAQs
Can I use the Cre8audio Assembler for microphones?
No, the Assembler is designed exclusively for line-level instrument signals and does not feature the microphone preamps required for condenser or dynamic microphones.
Is this mixer suitable for Eurorack modular systems?
Yes, it is designed to integrate seamlessly with Eurorack setups, provided you use an output module to bring modular-level signals down to line level.
Does the mixer have a built-in USB audio interface?
No, the Assembler is a pure analogue mixer and does not have built-in digital-to-analogue conversion or USB connectivity.
Can I use the EQ on all channels?
The dedicated low and high-frequency EQ controls are specifically limited to the first two channels.
Is the power supply included?
Yes, the unit ships with a power supply designed for the specific voltage requirements of the Assembler.
Troubleshooting
Low output volume on a specific channel
Check that the channel level knob is turned up and ensure the pan pot is not set to an extreme opposite position.
Hum or noise in the signal path
Verify that all cables are shielded instrument cables and check that you are not creating a ground loop by sharing power outlets with noisy digital equipment.
Auxiliary output is silent
Ensure the auxiliary send knob on the source channel is turned up and that your external effects unit is powered on and receiving signal.
Pros and Cons
Pros
- Warm, classic analogue signal path
- Small footprint fits perfectly in desktop synth rigs
- Excellent build quality for daily studio use
- Efficient routing for external effects
- Intuitive, hands-on control layout
Cons
- No microphone preamps for vocal recording
- Limited to line-level instrument inputs
- Fixed EQ bands on only the first two channels
Setup, Compatibility & Care
To set up the Assembler, connect your synthesizers via standard 1/4-inch instrument cables to the rear input jacks. Ensure that your output is routed to your studio monitors or audio interface line inputs. Because this is an analogue device, keep it away from extreme heat sources to prevent internal component drift. To clean, use a dry, lint-free cloth to wipe down the chassis. Avoid using liquid cleaners on the faceplate, as they can migrate into the potentiometers and cause noise or signal degradation over time. Ensure the unit is powered using the manufacturer-specified power supply to maintain stable voltage and optimal noise floor performance.