Faithfull Chisel - 450mm - Kango Shank

This chisel is designed for machines with a 21mm Hex shank fitting, commonly found on large capacity drilling and hammer drilling machines, including Kango 900/950K models.

No, you must ensure your hammer drill has a 21mm Hex shank fitting. Using it with incompatible machines can cause damage to both the tool and the chisel.

This chisel is intended for heavy-duty demolition and chiseling tasks, such as breaking concrete, brickwork, or removing stubborn materials.

Clean off debris after use, store it in a dry environment to prevent rust, and inspect it for any damage before and after use.

The chisel has a length of 450mm and a width of 25mm.

No, due to its design and intended use for heavy-duty applications, it is not suitable for fine or delicate chiseling work.

Ensure the shank is fully inserted into the chuck and that the machine's chuck mechanism is properly engaged. Verify the shank size matches the machine's requirement (21mm Hex).

Check if the chisel tip is dulled or damaged. Ensure the hammer drill is set to the correct impact/hammer function and that the chisel is not clogged with debris.

Confirm the chisel is securely tightened in the machine. Inspect the chisel shank and the machine's chuck for wear or damage. Use on appropriate material for the tool.