ASUS PRIME H510M-E - Micro ATX, 2 DDR4, VGA, HDMI, DP, M.2

This motherboard supports 10th and 11th Generation Intel® Core™, Pentium®, and Celeron® processors with the LGA 1200 socket.

It supports a maximum of 64 GB of DDR4-SDRAM across two DIMM slots. Supported memory clock speeds range from 2133 MHz to 3200 MHz.

No, the ASUS PRIME H510M-E does not have integrated Wi-Fi. You will need to add a separate Wi-Fi card or USB adapter if wireless connectivity is required.

The motherboard features one HDMI port (v2.0), one DisplayPort (v1.4), and one VGA (D-Sub) port, allowing for multiple display configurations.

Yes, the primary PCIe x16 slot supports PCIe 4.0, provided you are using an 11th Generation Intel® Core™ processor. Other PCIe slots are Gen 3.0.

You can connect up to four SATA III devices (HDDs/SSDs) and one M.2 slot (supporting NVMe SSDs at up to 32 Gbps).

The ASUS PRIME H510M-E is a micro ATX (mATX) motherboard, designed for smaller PC builds while offering essential features.

You can update the BIOS via a USB flash drive through the UEFI BIOS utility. Download the latest BIOS file from the ASUS support website for the PRIME H510M-E, extract it, and follow the on-screen instructions in the BIOS.

Verify that the ATX 24-pin and EPS 8-pin power connectors are securely seated on the motherboard. Check that the power supply switch is turned on and the wall outlet is functional. Ensure the case's front panel power switch is correctly connected to the motherboard headers.

Ensure the monitor cable is securely connected to both the motherboard's display output (HDMI, DisplayPort, D-Sub) and the monitor. Confirm that the graphics card (if installed) is properly seated and its power connectors are attached. Try booting with integrated graphics first if using a CPU with integrated graphics.

Ensure the RAM modules are fully seated in the correct DIMM slots as per the motherboard manual for dual-channel configuration. Try booting with a single RAM stick to identify a potentially faulty module. Check the QVL (Qualified Vendor List) on the ASUS support website for memory compatibility.

Verify that the M.2 SSD is installed correctly in the M.2 slot. Check the BIOS to ensure the M.2 slot is enabled and configured correctly. Note that installing an M.2 SSD might disable one or more SATA ports; consult the manual.

Ensure the latest Intel LAN drivers are installed from the ASUS support website. Check the Ethernet cable for damage and ensure it's securely plugged into both the motherboard and the router/switch. Confirm that the network connection is set to Gigabit speeds in your operating system's network settings.