DeWalt DWS777 Sliding Compound Mitre Saw - 216mm

Use the provided Allen keys to loosen the blade bolt, remove the old blade, and install the new blade, ensuring it's facing the correct direction and securely fastened.

Use blades specifically designed for the material you are cutting. The saw comes with a TCT tooth saw blade suitable for general wood cutting.

Loosen the mitre lock lever, select the desired angle using the mitre scale, and tighten the lock lever. Utilize the positive stops for common angles like 15, 22.5, 30, and 45 degrees.

Loosen the bevel lock lever, set the desired angle using the bevel scale, and tighten the lock lever.

Regularly clean the saw of sawdust. Lubricate the sliding rails and moving parts. Inspect the blade for sharpness and damage.

Always wear safety glasses, hearing protection, and a dust mask. Ensure the workpiece is securely clamped. Keep hands and fingers away from the blade. Read and follow all safety instructions in the manual.

Replacement parts can be found at authorized DeWalt dealers or online retailers. Reference the parts list in the owner's manual for specific part numbers.

The DeWalt DWS777 typically comes with a standard warranty. Refer to the product documentation for warranty details.

Check the power cord connection and the outlet. Ensure the power switch is in the 'on' position.

Check and calibrate the mitre and bevel angles. Ensure the blade is sharp and properly installed.

Ensure the material is not pinching the blade. Use a push stick to keep hands away from the blade and always make sure that the blade is appropriate for the material.

Clean the XPS light lens and make sure it is not obstructed. Check the alignment of the XPS light source and adjust if necessary.