Autobar Blind Rivets - 0.13 inch - Long Grip
Best current price£2.99from wilko
Best offers
Shopping.co.uk recommended and popular offers
wilko£2.99Visit shop Autobar - Long Grip Blind Rivets - 0.13 inch
Visit shopwilko£2.99Visit shop All Offers
2 offers from £2.99
View price history by clicking the chart icon.
Autobar 0.13 inch Long Grip Blind Rivets - Heavy Duty FastenersFree delivery in 1–3 days£2.99Visit shop →
Product Information
Full details
The Autobar Long Grip Blind Rivets are designed for DIY enthusiasts, automotive technicians, and professionals who require a high-strength fastening solution for materials where traditional threaded fasteners like nuts and bolts are inaccessible or impractical. These rivets provide a reliable, permanent connection for projects ranging from speaker installation to signage mounting; however, users should note that because these are permanent fasteners, they require physical removal (such as drilling) if the joint ever needs to be disassembled.
All features
| Brand | Autobar |
|---|
Extended Product Information
FAQs
Can these be used on thick materials?
Yes, the long-grip design is specifically intended to reach through thicker stacks of material than standard rivets.
Do I need a special tool?
You need a standard manual or pneumatic rivet gun that supports 0.13-inch (approx. 3.2mm) diameter rivets.
Are these removable?
These are permanent fasteners. They can only be removed by drilling out the rivet head with a standard drill bit.
Can I use these on wood?
While intended for metal and plastic, they can work on wood if the wood is thin and dense, though rivets are generally optimized for rigid materials.
Are these weather resistant?
Yes, but if used in extreme marine or salty environments, verify the material compatibility to prevent corrosion.
Troubleshooting
Rivet feels loose after installation
Ensure the hole was not drilled too large and that the rivet gun fully compressed the mandrel.
Mandrel does not snap off
Check that the rivet gun nose piece matches the rivet size and ensure you are pulling the handle fully through the complete stroke.
Pros and Cons
Pros
- Ideal for tight spaces where rear access is restricted
- Superior resistance to loosening from vibrations
- Provides a clean, finished appearance compared to bolts
- Works reliably with standard manual or pneumatic rivet guns
Cons
- Not intended for disassembly or removal without tools
- Requires a specific rivet gun tool for proper installation
- Cannot be adjusted once the mandrel has been snapped
Setup, Compatibility & Care
To install Autobar Long Grip Rivets, ensure you have a standard pop-rivet gun compatible with 0.13-inch fasteners.
- Drilling: Drill a hole slightly larger than the rivet diameter (typically 1/8 inch or 3.2mm) through both materials.
- Insertion: Insert the rivet head into the hole until the flange sits flush against the surface.
- Compression: Operate the rivet gun handles or trigger to pull the mandrel through the rivet body. This action expands the rear end of the rivet.
- Completion: Once the mandrel snaps off, the joint is secure.
For care, these rivets are generally maintenance-free. If installed in high-moisture areas, ensure the base materials are corrosion-resistant to prevent electrolytic reaction.