Best current price£113.94from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£113.94Visit shop Dell 9Cxf2 Memory Module 8 Gb 1 X 8 Gb Ddr4
Visit shop
eBay£141.55Visit shop Dell 9CXF2 DIMM.8GB.3200.1RX16.16.DDR4.NU
Visit shop9 offers from £113.94 - £380.73
View price history by clicking the chart icon.
10 offers from £78.75 - £211.45
View price history by clicking the chart icon.
10 offers from £80.25 - £212.85
View price history by clicking the chart icon.
This 16GB Dell memory module is designed for power users and professionals using compatible Dell OptiPlex, Precision, Vostro, and Inspiron systems who need to improve multitasking capabilities and system responsiveness. By providing 16GB of high-speed DDR4 memory, it allows for smoother operation of demanding applications and virtual machines. However, users must ensure their specific motherboard supports the 3200MHz clock speed and that they have an available 288-pin DIMM slot to accommodate the installation.
| Model Part Number | SNPDK8NXC/16G |
|---|---|
| Brand | Dell |
No, this specific module does not support ECC (Error Correction Code) and is intended for standard PC systems.
No, this is a 288-pin DIMM module designed for desktops and workstations, not the smaller SO-DIMM modules used in laptops.
While it may work, the memory will likely downclock to match the speed supported by your motherboard. Verify your specific PC's compatibility before purchasing.
Typically no, the system will automatically detect the memory, though you may want to enter BIOS to verify the total RAM capacity is registered correctly.
You can, but for best performance, it is recommended to use identical modules to ensure stable timings and dual-channel memory support.
Check your specific model's service manual or specifications on the Dell support website to verify the maximum memory speed supported.
Ensure the module is fully seated in the DIMM slot and that the retention clips have clicked into place.
Enter the BIOS settings to confirm the RAM is detected; if not, try reseating the module in a different slot if available.
Run a memory diagnostic tool like Windows Memory Diagnostic to check for hardware errors on the new module.
Before installation, ensure your computer is powered off and unplugged. Open the chassis and identify the empty memory slots on the motherboard. Align the notch on the memory module with the bump in the DIMM slot, then press down firmly until the side tabs click into place. This module is compatible with specific Dell models including the OptiPlex 3080, 5080, 7080, and various Precision Workstations. Keep the modules clean by holding them only by the edges to avoid static discharge or oil transfer to the golden contact points. Avoid installing in environments with high humidity or extreme temperature fluctuations.
