Best current price£14.65from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£14.65Visit shop Flexipads World Class 10371 Sander Extragrip Pad 115Mm M14
Visit shop
B&Q£17.07Visit shop B&Q - 10372 Sander Extragrip Pad 125mm M14 Fle10372
Visit shop17 offers from £14.65 - £22.99
View price history by clicking the chart icon.
This guide is for professionals and serious DIYers using rotary polishers or sanders who need a secure and effective way to attach non-woven abrasive discs. The key benefit is the enhanced grip provided by the GRIP(r) technology, ensuring discs stay in place during demanding tasks. A potential caveat is its specialized design for specific disc types, requiring users to confirm compatibility.
| Model Part Number | 10372 |
|---|---|
| Brand | Flexipads World Class |
This pad is specifically designed for non-woven material discs (often referred to as SCDs) that have a compatible backing to adhere to the GRIP(r) surface.
M14 refers to the standard metric thread size commonly found on the spindles of many angle grinders, polishers, and sanders in Europe and other regions. It indicates the diameter and pitch of the screw thread.
No, this pad is not designed for standard hook-and-loop (Velcro) backed abrasive discs. Its GRIP(r) surface is optimized for the specific material of non-woven discs.
Ensure both the pad's GRIP(r) surface and the back of your non-woven disc are clean, dry, and free from any oils or contaminants. Apply firm, even pressure when attaching the disc.
The 3mm foam layer provides a slight cushioning effect, allowing the pad and disc to better conform to subtle curves and contours on the workpiece, while still maintaining the rigidity needed for effective sanding.
While versatile, its 125mm size and rigid backing may be better suited for general surface preparation rather than extremely fine, detailed edge work where a smaller or more flexible pad might be preferred.
Ensure the disc and pad surfaces are clean and free from dust or grease. Confirm you are using a compatible non-woven abrasive disc (SCD). Press the disc firmly onto the pad.
Check that the pad is securely screwed onto the tool's spindle. Ensure the tool's spindle is clean and undamaged. Verify the abrasive disc is centered and properly attached.
This could indicate excessive wear on the pad's internal threads or bearing (if applicable). Inspect the pad for damage. If damage is found, replace the pad. Ensure the disc is not catching on anything.
Clean the threads on both the tool's spindle and the pad. Ensure you are using a tool with an M14 thread. Do not force the pad; if threads are cross-matched or damaged, seek professional inspection of the tool.
Setup:
Compatibility:
Care:
