Laser Tools Bulb Fitting Kit - 2 Piece Set

The kit is suitable for bayonet, screw, and wedge type bulb bases commonly found in vehicles.

The stainless steel inspection mirror has a telescopic range from 245mm up to 740mm.

The pliers are designed for gripping the base of bulbs, particularly those in hard-to-reach locations. They work best with standard bulb base designs.

Yes, the inspection mirror is made of stainless steel with a reflective surface, designed for durability.

Wipe the tools clean with a dry or slightly damp cloth. Avoid harsh solvents. Clean the mirror with a soft, lint-free cloth.

The diameter of the inspection mirror is 50mm.

Yes, bulb pliers are available separately under Part Number 7270.

Ensure the cup-type ends are correctly aligned with the bulb base. Check for any debris on the bulb or pliers. For very small or unusually shaped bases, slight adjustment of grip pressure may be needed.

Check for any obstructions in the mirror sections. Gently clean the telescoping parts. If stiffness persists, a very small amount of light lubricant (e.g., WD-40 applied sparingly to the telescoping joints) may help, followed by wiping away excess.

Clean the mirror surface with a soft, lint-free cloth. Avoid touching the glass with bare fingers. If smudges persist, use a glass cleaner suitable for optical surfaces.

Ensure you are using the correct grip pressure. The dipped handles are designed for comfort, but excessive force can still cause fatigue. Take breaks as needed.