Best current price£22.97from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£22.97Visit shop Startech.com 3M (9.8Ft) Lc To Lc (Upc) Om4 Multimode Fiber Optic Cable
Visit shop22 offers from £22.97 - £44.41
View price history by clicking the chart icon.
This 3-meter LC to LC OM4 multimode fiber optic cable is designed for high-speed networking environments, offering reliable 40/100G connections with its bend-insensitive, low insertion loss, and LSZH (Low Smoke Zero Halogen) construction. It is ideal for users in data centers and high-density environments who require robust and safe fiber optic cabling. A key advantage is its push-pull tab connectors for easy installation, though its specific OM4 designation means it's optimized for certain wavelengths and may not be ideal for all legacy systems.
| Series | OM4 |
|---|---|
| Model Part Number | 450FBLCLC3PP |
| Brand | StarTech.com |
OM4 fiber offers higher bandwidth and longer reach capabilities compared to older multimode standards like OM1, OM2, and OM3, making it ideal for 40Gbps and 100Gbps Ethernet.
LSZH stands for Low Smoke Zero Halogen. This means the cable jacket is designed to emit minimal smoke and no toxic halogens when exposed to fire, improving safety in enclosed spaces.
Yes, OM4 fiber optic cables are backward compatible with OM3 and other lower-grade multimode fiber standards. However, you will be limited by the capabilities of the OM3 equipment.
The push-pull tabs on the LC connectors are designed for easier and more secure insertion and removal of the cable, especially in high-density patching environments where access can be limited.
Use a specialized fiber optic cleaning tool, such as a one-click cleaner or lint-free swabs with appropriate cleaning fluid, to clean the ceramic ferrule tip. Avoid touching the tip with your fingers.
For 100GBASE-SR4 over OM4 fiber, the maximum distance is typically around 100 meters. Always consult the specifications of your network equipment for precise distance limitations.
While the LSZH jacket offers some protection, this cable is primarily designed for indoor, high-density networking environments. For outdoor use, specialized outdoor-rated fiber optic cables are recommended.
Verify that both LC connectors are fully seated. Check for dirt or damage on the connector end-faces and clean if necessary. Ensure the cable is not severely kinked or damaged. Confirm that the connected devices are compatible and configured correctly.
Inspect the cable for any signs of physical damage, especially within the jacket or at the connector points. Ensure the fiber mode (OM4) and connector type (LC UPC) match the requirements of your network equipment. Test with a different known-good cable to isolate the issue.
Ensure you are pulling the push-pull tabs correctly. Check that no debris is obstructing the connector mechanism. If persistent, inspect the connector for damage.
Setup: Ensure both the source and destination devices have compatible LC UPC ports. Align the connectors carefully and push until they click into place. The push-pull tabs provide tactile feedback for secure connection and easy release.
Compatibility: This OM4 cable is suitable for 40GBASE-SR4, 100GBASE-SR4, and other high-speed multimode applications. It is backward compatible with OM3 and older multimode standards (e.g., 10/40 Gigabit Ethernet). Ensure your network equipment supports LC connectors and multimode fiber.
Care: Keep the connector end-faces clean to prevent signal degradation. Use appropriate fiber optic cleaning tools (swabs, pens) and avoid touching the ferrule tip. Store the cable away from excessive heat, moisture, and sharp objects. Inspect connectors for damage before each use.
