Best current price£7.37from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.37Visit shop Neutrik Ncj9fis Xlr/6.35Mm Stereo Jack Panel Mount Socket Switched Solder 5054338111902
Visit shop4 offers from £7.37 - £9.55
View price history by clicking the chart icon.
The Neutrik NCJ9FIS is designed for professional audio engineers, system integrators, and DIY studio builders who need to maximize connectivity in limited panel space. By combining a 3-pin XLR female connector and a 1/4-inch (6.35mm) stereo jack into one unified housing, it offers a high-density solution for custom patch bays and equipment interfaces. While it provides excellent versatility and space efficiency, users should be aware that the integrated switching mechanism requires careful soldering and precise planning for signal routing.
| Colour | Black |
|---|---|
| Model Part Number | NCJ9FIS |
| Brand | kenable |
Yes, both the XLR connector and the 6.35mm stereo jack support balanced audio connections.
Yes, the NCJ9FIS is designed for standard Neutrik D-series mounting hole patterns.
The socket itself is a passive component; it will pass phantom power if your equipment or preamp provides it.
The switched contacts allow the device to automatically reroute signals when a cable is inserted, such as disconnecting a master signal when an insert cable is plugged in.
This connector is primarily designed for analog audio; check the specific frequency response requirements if considering digital audio applications.
Verify that your wiring corresponds correctly to the tip, ring, and sleeve contacts and check if the switch contacts are interrupting the path when no jack is present.
Inspect the solder joints on the back of the socket to ensure there are no cold joints or loose wires caused by vibration.
Installation of the NCJ9FIS requires basic electronics knowledge and proper soldering equipment. The socket fits standard D-size panel cutouts. When soldering, ensure you use high-quality leaded or lead-free solder and avoid overheating the pins, as excessive heat can damage the internal switching contacts. Check the datasheet for the specific pinout configuration, as the switched contacts are separate from the primary signal pins. To maintain the unit, keep the connectors free of dust and debris using compressed air. If the socket becomes stiff, do not use heavy lubricants; instead, verify that the insertion debris is clear from the 1/4-inch barrel.
