Flush Cutting Multi Tool Blades - 5 Piece - Eclipse

These blades are ideal for cutting wood, plasterboard, and various types of plastics. They feature aggressive teeth for efficient cutting through these materials.

The Eclipse MF3440WS blades have a universal fit system designed for compatibility with most corded and cordless oscillating multi-tools. However, it's always best to check your specific tool's manual.

The cutting depth for these blades is 40mm (approximately 1 9/16 inches).

While they may be able to cut very thin soft metals, these blades are primarily designed for wood, plasterboard, and plastics. For significant metal cutting, a blade specifically designed for metal would be more appropriate and safer.

This pack contains five flush cutting multi-tool blades.

Flush cutting means being able to cut material right up to a surface without damaging that surface. For example, cutting off protruding dowels or nails close to a wall.

After use, clean the blades with a dry cloth or brush to remove debris. Store them in a dry place to prevent rust. Inspect them for wear before each use.

Ensure the blade is correctly installed and securely fastened. Check for excessive wear on the teeth. The material being cut may be too hard for this blade type; consider a different blade if cutting metal or very dense materials.

Verify that your oscillating multi-tool uses a universal fit system. Ensure there is no debris in the tool's mounting mechanism or on the blade's attachment point. Consult your tool's manual for specific blade installation procedures.

Avoid forcing the blade. Let the tool's speed and the blade's design do the work. Ensure you are cutting appropriate materials. Excessive heat can also degrade the blade; allow it to cool periodically during prolonged use.