Soudal Repair Express Plaster - White

The plaster dries very quickly, usually within a few hours, depending on the environmental conditions (temperature and humidity).

While the plaster is suitable for various interior surfaces, its long-term performance on exterior surfaces may vary. It is designed for indoor use.

Yes, once the plaster is fully cured, it can be sanded to achieve a smooth finish.

Yes, for deeper holes or cracks, apply the plaster in multiple thin coats, allowing each coat to dry before applying the next.

You can use most types of paint, including latex and acrylic paints, after the plaster is fully cured and sanded.

Clean tools with water immediately after use. Dried plaster is more difficult to remove.

It is suitable for use on plasterboard, concrete, stone, plasterwork, masonry, and decorative plaster surfaces.

Ensure the surface is clean, dry, and free of dust or loose particles. Lightly sand the area and apply a primer if necessary.

Ensure that the product is Soudal Repair Express Plaster, which is non-shrinking. If the issue persists, the repair may be too large for this product; consider a different product or method.

Ensure the application environment is well-ventilated. The curing time may be affected by humidity and temperature. If necessary, use a fan to increase air circulation.

Apply the plaster in thin layers. Allow each layer to dry before sanding. Use fine-grit sandpaper for the final sanding and use a damp cloth to remove sanding dust