Barnwell Adhesive Trowel Blade - 5 Pack - A2

The notches on the trowel blade are designed to spread adhesive in a uniform pattern, ensuring consistent coverage and thickness. This is critical for achieving strong, durable bonds.

This pack contains 5 replacement Barnwell A2 notched trowel blades.

This blade is designed for general adhesive applications, such as those used for flooring, tiles, or similar materials where a consistent spread is required.

Yes, these are replacement blades and require a compatible Barnwell adhesive trowel handle to be used.

Clean the blade immediately after use with a damp cloth to remove all residual adhesive. Allow it to dry completely before storing.

'A2' refers to the specific model or type of the notched trowel blade, indicating its notch size and pattern, which is optimized for adhesive application.

While designed for adhesives, the suitability for thin-set mortar depends on the mortar manufacturer's recommendations for notch size. Check your thin-set mortar specifications.

Ensure you are using a compatible Barnwell trowel handle and that the blade is correctly aligned with the handle's fitting mechanism. Check for any obstructions.

Clean the blade thoroughly to remove any hardened adhesive. Ensure the blade is properly seated on the handle and that you are holding the trowel at the correct angle (typically 45-60 degrees) for optimal spreading.

Avoid excessive pressure during application. Ensure you are using the blade only for its intended purpose (adhesive spreading) and not for scraping or aggressive removal of materials.