Best current price£7.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.99Visit shop B&Q - 2Pc Carbon Brushes For Makita Cb440 Dtd146 Dhp456 Dhp458 Dhp482 Dtw251 Bhp451 Bhp452
Visit shop
Amazon£8.99Visit shop Okodoko 2Pc Carbon Brushes For Makita Cb440 Dtd146 Dhp456 Dhp458 Dhp482 Dtw251 Bhp451 Bhp452
Visit shop2 offers from £7.99 - £8.99
View price history by clicking the chart icon.
These OKODOKO Carbon Brushes (CB440) are designed for owners of compatible Makita power tools seeking to restore or maintain optimal motor performance. They offer a key benefit of ensuring efficient power transfer for consistent operation, but a potential caveat is that installation requires basic mechanical familiarity. This guide covers their features, benefits, and practical usage for tool owners.
| Model Part Number | CB440 |
|---|---|
| Brand | OKODOKO |
The replacement frequency depends on usage. Carbon brushes are wear items. Inspect them regularly, typically every 6-12 months depending on tool use, and replace them when they are visibly worn down to about half their original length or start causing performance issues.
These OKODOKO carbon brushes are specifically designed for the listed Makita models. Using them on other brands or models may not fit correctly and could damage the tool or the brushes.
Common signs include a decrease in tool power or speed, intermittent operation, excessive sparking from the motor, or a humming noise from the motor. The tool may also stop working altogether.
Installation is generally straightforward and requires basic mechanical skills. Most users can replace them by following the steps provided in the setup section. However, if you are unsure, consult a professional.
Ensure your tool's model number is listed in the compatibility section of this guide. The part number CB440 also refers to the specific type of brush.
Yes, worn carbon brushes are a common cause of reduced performance. Replacing them with new, high-quality brushes like these OKODOKO ones can restore the tool's original power and efficiency.
Ensure the tool is properly plugged in. Double-check that the new carbon brushes are correctly seated and making firm contact with the motor's commutator. Verify that the brush caps are securely tightened.
Confirm the carbon brushes are the correct model for your tool. Ensure they are properly installed and making consistent contact. Check the tool's motor for any other potential issues like debris buildup on the commutator.
Some minor sparking can be normal, especially when new. However, significant or continuous sparking may indicate worn or damaged brushes, improper seating, or a damaged commutator. Re-check brush installation or consider if the commutator needs cleaning or repair.
Ensure the carbon brushes are securely fitted and not loose. Check for any debris caught in the motor housing or around the brush contact points. Verify the brush caps are properly sealed.
Compatibility: These OKODOKO Carbon Brushes are specifically designed for the following Makita models: CB440, DTD146, DHP456, DHP458, DHP482, DTW251, BHP451, and BHP452. Always verify your tool's model number before purchasing.
Setup (Replacement):
Care: Carbon brushes are a consumable part. Inspect them periodically for wear. Clean any dust accumulation around the brush holders with a dry cloth or brush. Avoid exposing the brushes or tool motor to excessive moisture or dirt, which can accelerate wear and reduce performance.
