UniBond Silicone Sealant - Translucent - 280ml

This sealant is specifically designed for interior wet areas like kitchens and bathrooms. For exterior applications, a different type of sealant may be required.

The sealant typically cures within 24 hours, but this can vary depending on temperature and humidity. Avoid contact with water or use of the sealed area until fully cured.

No, silicone sealants are generally not paintable. It's best to apply the sealant after painting or to use a paintable sealant if painting is a requirement.

The 15-year guarantee refers to the product's performance and durability against failure when used as directed.

Yes, this sealant is suitable for adhering to UPVC and painted surfaces.

Acetoxy cure means the sealant releases acetic acid (which smells like vinegar) as it cures. Ensure good ventilation during application and curing. It is not suitable for use on natural stone like marble due to potential etching.

Ensure the cartridge nozzle is cut correctly and the plunger in the sealant gun (if used) is properly engaged with the cartridge base.

Verify that the surfaces are thoroughly clean, dry, and free from any contaminants like soap scum, grease, or old sealant. Ensure the surface is compatible (e.g., non-porous).

This could be due to excessively thick application, low temperatures, or high humidity. Ensure application conditions are within the recommended range and allow more time for curing. Avoid disturbing the seal during this period.

While this sealant is anti-mould, persistent moisture and inadequate ventilation can still encourage mould growth. Ensure the area has proper ventilation and address any underlying water leaks.