SleeperSecure Screws - Perry - Black

These screws are specifically designed for securing timber railway sleepers, particularly when used in conjunction with SleeperSecure brackets and plates for projects like garden retaining walls and raised beds.

They are designed for timber sleepers. While they can be used in other timber applications, their 63mm length and specific design are optimized for sleepers. They are particularly recommended for Oak sleepers due to their stainless steel composition.

Stainless steel offers excellent resistance to rust and corrosion, which is vital for outdoor applications like sleeper projects. It also prevents staining of the timber, especially important with Oak.

The specific hex size depends on the exact manufacturing tolerance, but typically a standard size for hex head screws of this nature will fit. It is best to test with common sizes or refer to any packaging information if available.

While these screws provide a strong fixing for sleeper projects, their suitability for other major structural load-bearing applications should be assessed by a qualified engineer, as they are specifically designed for the SleeperSecure system and sleeper construction.

The packs are simply different quantities of the same screws, allowing you to purchase the amount that best suits the size of your project. A pack of 30 is for smaller jobs, while a pack of 150 is for larger undertakings.

The SleeperSecure screws are 63mm long, making them suitable for fixing through standard timber sleepers and into the ground or connecting sleepers together.

Ensure you are using the correct size hex driver bit and that it is firmly seated in the screw head. Apply firm, consistent downward pressure while driving the screw. If the head is already damaged, you may need to use a screw extractor.

Check that you are driving the screw into solid timber and not a void. If working with very dense wood, ensure a pilot hole has been drilled to the correct size. The timber itself may be too soft or degraded for a secure fixing.

Although made of stainless steel, aggressive environmental factors can rarely affect them. If staining is observed on Oak, it is usually tannins reacting with the environment, not the screw. Clean the area with a suitable timber cleaner. Ensure correct grade (A2/304) stainless steel was purchased for Oak compatibility.

This may indicate the need for a pilot hole. Predrill a hole slightly smaller than the screw's shank diameter, especially in hardwood. Ensure your power tool has sufficient torque.