Hep2O Equal Tee - White - 28mm

The primary advantage is the speed and ease of installation. The push-fit mechanism allows for secure, leak-free connections to be made in seconds without the need for specialized tools or soldering.

No, Hep2O fittings are designed to work exclusively with Hep2O pipes and other compatible pipes that meet the specified British Standards. Using with other brands is not recommended and will void the guarantee.

Hep2O fittings provide 'joint recognition'. You will feel a tactile click and often hear an audible rumble when the pipe is pushed in fully and the O-ring has created a secure seal.

Hep2O fittings come with an industry-leading 50-year guarantee, providing long-term confidence in their durability and performance.

You will need the Hepkey Release Tool. Slide the tool over the pipe and push it towards the fitting body, which will release the grip of the internal mechanism, allowing you to pull the pipe out.

The system can operate up to 114°C and 12 BAR at minimum temperatures (-5°C), but the pressure reduces to 3 BAR at the maximum operating temperature of 114°C.

Yes, the Hep2O system is suitable for both hot and cold water services, including domestic heating systems within the specified temperature and pressure limits.

Ensure the pipe is fully inserted to the correct depth mark and that the pipe end is clean, round, and free of debris. Try removing and re-inserting the pipe.

The fitting may not have been fully inserted or the pipe may have been damaged. Remove the fitting using the Hepkey Release Tool, inspect the pipe end for damage, and re-fit or replace the pipe/fitting as necessary.

Ensure you are using the correct Hepkey Release Tool and that it is fully engaged around the pipe and pushed towards the fitting body. Ensure no excessive force is applied that could damage the pipe.

Check for obstructions inside the fitting or at the end of the pipe. Ensure the pipe is not deformed or kinked. The pipe must be round for a secure seal.