Peli 1030 Microcase Clear with Yellow Liner

IP67 certification means the case is dustproof and protected against immersion in water up to 1 meter for 30 minutes.

No, the Peli 1030 Micro Case is water-resistant and watertight for protection against splashes and brief immersion, but it is not designed for swimming or diving.

Peli offers a Lifetime Warranty on its Protector cases, where permitted by law.

The external dimensions are 19.05 cm x 9.83 cm x 6.17 cm.

The rubber liner doubles as the O-ring seal and is a critical component. While not typically user-replaceable, if it is damaged, it may affect the case's protective capabilities. Contact Peli for support if the liner is compromised.

The Peli 1030 features a built-in loop for attaching a lanyard or carabiner, which may be included depending on the specific package or retailer.

Ensure the automatic pressure equalization valve is not obstructed. If the case has been exposed to extreme temperature changes, allow it to acclimate to ambient temperature before opening.

Check that the rubber liner (O-ring seal) is clean, undamaged, and properly seated in its groove. Ensure the latches are fully closed and latched.

Inspect the latches for damage or debris. Ensure the contents inside the case do not prevent the lid from closing completely.

This may occur if the case is brought from a cold environment into a warm, humid one. Allow the case to gradually acclimate to the new temperature. Ensure the seal is intact and the case was properly closed.