Best current price£444.76from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£444.76Visit shop Hpe 805364-001 Internal Solid State Drive 480 Gb 2.5" Serial Ata
Visit shop2 offers from £444.76 - £533.71
View price history by clicking the chart icon.
The HPE 480GB Internal Solid State Drive (805364-001) is designed for IT professionals and administrators managing enterprise server or workstation environments who require reliable, consistent data storage. Its primary benefit is providing stable solid-state performance with a standard Serial ATA interface, making it an excellent choice for boot drives or mid-tier storage tasks. One caveat to keep in mind is that at 480GB, this drive is best suited for OS installations or specific application workloads rather than massive bulk data storage.
| Model Part Number | 805364-001 |
|---|---|
| Brand | HPE |
This drive is designed for HPE server and workstation environments, but compatibility depends on the specific server model and drive carrier requirements. Always consult the HPE QuickSpecs for your server model.
Hot-swapping capability depends on the server chassis and backplane configuration. If your server is designed for hot-swap drives and the drive is mounted in the correct tray, it should be supported.
While it uses a standard SATA interface, this drive is optimized for HPE server environments and may not behave as expected with consumer-grade motherboards or lack the necessary drive caddy.
The endurance varies based on the specific usage model. Please refer to the HPE datasheet for the 805364-001 for specific TBW (Total Bytes Written) ratings.
Generally, the drive is managed by the server's RAID controller. Ensure your RAID controller drivers are updated via the HPE Support Center.
Verify that the drive is fully seated in the backplane and check that the SATA cable (if applicable) is securely connected.
Check if the server firmware or the Smart Array controller firmware is outdated; update if necessary. Also, ensure the drive is not reaching its total capacity limit.
Check the HPE Integrated Lights-Out (iLO) logs to identify the specific error code, which may indicate a drive failure or a backplane communication error.
To install this drive, ensure your server is powered down and disconnected from any power source. Locate the appropriate 2.5-inch drive bay, slide the drive into the carrier, and secure the mounting screws. Once installed, the drive will be detected by the HPE Smart Array controller; you may need to configure the logical drive via the Intelligent Provisioning or Option ROM utility. For care, ensure the server’s chassis fans are operational to maintain appropriate ambient temperatures. Avoid exposing the drive to static electricity during installation and ensure the server's firmware is updated to the latest version for maximum compatibility.
