Duplex Rope Clip Clamp - SolaDirect
Best current price£3.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£3.99Visit shop B&Q - 1 X 3 mm Duplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Visit shopB&Q£3.99Visit shop One Offer
1 offer from £3.99
View price history by clicking the chart icon.
B&QB&Q - 1 X 3 mm Duplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Free delivery in 1–3 days
£3.99
Visit shop
Product Information
Full details
The SolaDirect Duplex Rope Clip Clamp is designed for securing the loose end of a wire rope loop, allowing for reliable connections to other cables or equipment like thimbles and turnbuckles. It's suitable for wire ropes, as well as jute and polypropylene ropes, with its specified diameter corresponding directly to the rope size. While offering a secure fastening solution, users should ensure the correct clamp size is selected for their specific rope diameter to maintain optimal performance and safety.
All features
| Brand | SolaDirect |
|---|
Extended Product Information
FAQs
What is the primary use of a Duplex Rope Clip Clamp?
Its primary use is to secure the loose end of a loop formed in a rope, preventing it from unraveling and allowing for connections to other hardware.
Can I use this clamp on any type of rope?
This clamp is suitable for wire ropes, jute ropes, and polypropylene ropes. The key is to match the clamp's diameter to the rope's diameter.
How many clamps should I use for a secure loop?
For most wire rope applications, two to three clamps are recommended for creating a secure loop. Always refer to load rating guidelines if available.
What happens if I over-tighten the clamp?
Over-tightening can crush the rope fibers, weakening the rope and reducing the holding strength of the clamp. Tighten firmly but avoid excessive force.
Does the clamp diameter refer to the rope or the clamp itself?
The given diameter corresponds to the size of the matching rope the clamp is designed for.
How often should I check the tightness of the clamps?
It's recommended to check the tightness after the initial load is applied, and then periodically during use, especially for critical applications.
Troubleshooting
Rope loop feels loose or insecure.
Check if all nuts on the clamps are tightened evenly and sufficiently. Ensure the correct clamp size for the rope diameter was used. Consider adding an additional clamp if the load is heavy.
Clamp is difficult to install.
Verify that the clamp size matches the rope diameter. Ensure the rope is not frayed and is positioned correctly within the clamp jaws.
Visible damage or corrosion on the clamp.
Remove the clamp from service immediately and replace it. Continue to inspect regularly.
Pros and Cons
Pros
- Provides a secure and reliable method for creating rope loops.
- Versatile use with different types of ropes.
- Enables easy connection to other rigging components.
- Direct diameter correspondence simplifies selection.
- Durable construction ensures longevity.
Cons
- Requires correct sizing for optimal security.
- May require multiple clamps for heavier loads.
- Not designed for dynamic or extreme shock loading.
- Installation requires careful tightening to avoid rope damage.
Setup, Compatibility & Care
Setup:
- Create a loop in your rope, placing a thimble inside if desired.
- Position the Duplex Rope Clip Clamp over the loose end and the main rope, ensuring the U-bolt is on the dead (loose) end.
- Hand-tighten the nuts on the U-bolt.
- Using a wrench, tighten the nuts evenly. Avoid over-tightening, which can crush the rope.
- After the initial load is applied, re-tighten the nuts as the rope may settle.
Compatibility:
- Wire rope
- Jute rope
- Polypropylene rope
- Designed for rope diameters corresponding to the clamp size.
Care:
- Inspect clamps regularly for signs of corrosion, wear, or damage.
- Clean with a dry cloth; avoid harsh chemicals.
- Ensure nuts remain tightened, especially after initial use and re-tensioning.