Best current price£128.13from eBay
Shopping.co.uk recommended and popular offers
eBay£128.13Visit shop Tacwise D9040V Pneumatic Narrow Crown Stapler 15-40mm Type 90 TACD9040V
Visit shop1 offer from £128.13
View price history by clicking the chart icon.
The Tacwise D9040V is a lightweight and fast pneumatic narrow crown stapler designed for professionals undertaking tasks like furniture manufacture, flooring, plasterboard installation, trellis building, and panelling. Its key benefit lies in its speed and precision, enabled by an extended nose piece for accurate placement. A potential consideration is its reliance on a pneumatic air source, requiring a compressor.
| Model Part Number | TACD9040V |
|---|---|
| Brand | Tacwise |
The D9040V uses Tacwise 90 series narrow crown staples, with lengths ranging from 15mm to 40mm.
The recommended operating air pressure is between 60 and 100 PSI.
No, the D9040V is a pneumatic tool and requires a connection to an air compressor to function.
The trigger mechanism typically allows for selection between contact (bump) and sequential firing. Refer to the user manual for the specific operation of the trigger on your model.
The magazine has a load capacity of 100 narrow crown staples.
The quick-release nose allows for faster and easier clearing of jammed staples, minimizing operational downtime.
It is ideal for furniture manufacture, flooring, plasterboard, trellis work, and panelling due to its speed, precision, and lightweight design.
Check air pressure is within the 60-100 PSI range. Ensure the air line is securely connected and there are no leaks. Verify the magazine is loaded correctly and the nose is firmly pressed against the workpiece.
Increase air pressure slightly, ensuring it remains within the 100 PSI limit. Check the staple length is appropriate for the material. Ensure the tool's magazine and firing pin are clean and free from obstruction.
Use the quick-release nose to clear the jam. Ensure you are using the correct size and type of Tacwise 90 series staples. Check for bent staples in the magazine. Avoid forcing the tool; ensure proper air pressure and workpiece contact.
Ensure the variable exhaust is not blocked. Check seals around the exhaust port. If the leak persists, contact customer support or a qualified service technician.
Setup:
Compatibility:
Care:
