Avenli Single Air Bed - Flannel

No, an air pump is not included. You will need to use your own standard air bed pump, either manual or electric, to inflate the bed.

The dimensions of the Avenli Single Air Bed are approximately 191cm (Length) x 73cm (Width) x 22cm (Depth).

Yes, the Avenli Single Air Bed is designed for both indoor and outdoor use. When using outdoors, ensure it is placed on a clean, relatively smooth surface to minimize the risk of punctures.

To clean, simply wipe the surface with a damp cloth and a mild soap solution. Allow the bed to air dry completely before deflating and storing it.

The air bed comes with a repair patch. Clean and dry the area around the hole, then apply the repair patch firmly over the puncture, pressing down for several minutes to ensure a good seal.

After ensuring the bed is completely deflated and dry, fold it neatly. Store it in a cool, dry place, away from direct sunlight, extreme temperatures, and sharp objects.

Yes, the soft flocked surface is designed to enhance comfort by providing a pleasant sleeping texture and helping to prevent bed sheets from slipping during use.

First, ensure the safety valve cap is fully and securely closed. If air loss continues, inflate the bed fully and listen closely for hissing sounds or apply soapy water to the surface (especially seams and the valve area) to locate small punctures or leaks. Use the provided repair patch for any identified holes.

Check that the pump nozzle is fully inserted into the safety valve and that the valve is completely open. Ensure your pump is powerful enough for an air bed. If using a manual pump, ensure efficient, continuous pumping action. If an electric pump, check its power source.

Adjust the air level to your personal preference. For a softer feel, release a small amount of air by briefly opening the valve. For a firmer feel, add more air with your pump. Remember not to over-inflate to prevent damage.