Fiddes Clear Glaze - 1 Litre - Clear Matt

For most applications, two coats are sufficient. However, for high-traffic areas, a third coat may be necessary to provide maximum protection.

No, Fiddes Clear Glaze is designed for interior use only.

Use a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals.

Allow 4-6 hours of drying time between coats, ensuring good ventilation.

Refer to the product label for specific shelf life information. Store the product properly in a cool, dry place.

It is recommended to remove any existing finishes before applying Fiddes Clear Glaze for optimal adhesion and performance.

A high-quality brush with soft bristles is recommended for a smooth finish. Ensure the brush is compatible with solvent-based products.

Work in a well-ventilated area. Wear appropriate protective gear, such as gloves and eye protection. Avoid contact with skin and eyes.

Ensure adequate ventilation and check the room temperature. Solvent-based products dry slower in cold or poorly ventilated conditions. Ensure the coats are thin.

Apply thinner coats and avoid over-brushing. Ensure the brush or pad is clean. Lightly sand between coats to remove imperfections.

The finish may not be fully cured. Allow additional drying time. Ensure the product hasn't expired.

Ensure the surface is completely clean and free of contaminants before application. Apply thin coats to prevent cloudiness. Stir the product well before use.