Kenable Ready Made Faceplate Module 3.5mm Stereo Jack Panel Mount Stub 15Cm - Kenable - 006662

No, the module is designed to press into compatible faceplates, and the stub is pre-assembled, requiring no tools for its connection.

The ready-made cable stub is 15cm in length.

It is designed to fit Kenable faceplates that accommodate these specific modules. Compatibility with other brands is not guaranteed.

If you are installing a faceplate with multiple openings but only using one or a few of the ready-made stubs, a blanking plate covers the unused openings for a cleaner look.

This module is designed for 3.5mm stereo jack connections, typically used for audio output or line-level input. While a microphone might have a 3.5mm plug, its impedance and signal level may not be suitable for this type of connection without an appropriate adapter or interface.

Use a dry, lint-free cloth to gently wipe the front socket. Avoid using liquids or cleaning agents.

It supports standard 3.5mm stereo jack audio signals.

Check that the 3.5mm jack is fully inserted into both the front and rear sockets. Verify the audio source and output devices are functioning correctly. Ensure the cable used to connect to the rear socket is not damaged.

Ensure the connections are secure. Clean the contacts on the jack plug and socket with a dry cloth. Check the integrity of the cable connected to the rear of the module; a damaged cable can cause poor signal.

Confirm you are using a compatible Kenable faceplate designed for this module type. Ensure the module is correctly aligned before pressing it into place.

This module requires a deep back box. If a standard back box is installed, you may need to upgrade to a deeper one or reconsider the installation location.