D-C-Fix - Self Adhesive Wall Tiles - Solid Concrete

Yes, they can be used in showers, but the raw edges must be sealed with silicone sealant to ensure waterproof protection.

You'll need a utility knife, a ruler or measuring tape, a pencil, and optionally, silicone sealant and a caulking gun for the edges.

Yes, the adhesive is designed to be removable. However, be cautious and remove the tiles slowly to avoid damaging the underlying surface.

Wipe the tiles with a damp cloth and a mild soap solution. Avoid using abrasive cleaners or scrubbing pads.

It is not recommended to use these tiles on textured walls as the adhesive may not adhere properly. The surface should be flat and smooth.

Each tile measures 30.5 x 30.5cm.

A pack contains 18 tiles.

A pack covers 1.68 square meters.

Ensure the surface is clean, dry, and free of contaminants. Apply firm pressure when sticking the tiles. If the surface is uneven, consider using a primer or smoothing the surface before application.

Make sure all raw edges are sealed with silicone sealant. Check for any gaps or cracks and reseal them as necessary.

Use a sharp utility knife and score the tile multiple times before snapping. Make sure to cut from the front of the tile.

Ensure the edges are firmly pressed down during installation. Use a small amount of adhesive if necessary, especially in high-moisture areas.