FloPlast Round Downpipe Socket - Brown - 68mm

This socket is designed to fit 68mm round downpipes.

Simply push the downpipe ends into each side of the socket until they are securely fitted. Ensure the pipes are clean before installation.

Yes, the push-fit design allows you to remove the pipes for cleaning.

The socket is made of a durable material designed for use in plumbing systems, specifically by FloPlast.

Yes, when installed correctly, the socket provides a watertight seal.

Check that the pipes are fully inserted and the socket isn't damaged. Ensure proper alignment and reseat the pipes. Consider replacing the socket if the leak persists.

Yes, as long as the downpipes are 68mm round and compatible with the socket's material.

Ensure the downpipe ends are clean and free of burrs. Apply a small amount of lubricant to the inside of the socket if needed. Make sure you are using the correct size downpipe (68mm).

Check that the downpipes are fully inserted into the socket. Inspect the socket and pipes for cracks or damage. Replace any damaged parts. Ensure the pipes are properly aligned and seated.

Use a twisting motion to help loosen the connection while pulling the pipe. If necessary, use a flathead screwdriver to gently pry the pipe from the socket.