K2 Caliper Spray Paint - Silver - 400ml

The paint requires approximately 12 hours at 20°C to fully cure. It's crucial to allow this full curing time before operating the vehicle.

Yes, the product can be used with or without disassembling the calipers. However, it is essential to thoroughly mask all surrounding components, especially moving brake parts, friction elements, and cables, if the wheels remain on.

You need to clean the surface with 240-360 grade sandpaper, then degrease it thoroughly to ensure optimal adhesion.

It is recommended to apply 2-3 thin coats for best results, with a 10-minute interval between each coat.

Apply the paint from a distance of 20-30 cm for an even finish.

Yes, the formulation includes anti-corrosive properties to help protect the brake calipers from rust and degradation.

This paint is specifically formulated for high-temperature brake calipers. While it may adhere to other metal surfaces, its high-temperature resistance is its primary feature, and its suitability for other applications may vary.

Ensure consistent distance and speed while spraying. Apply multiple thin coats rather than one heavy coat. Shake the can thoroughly before and during use.

The surface was likely not properly cleaned or degreased prior to application. Ensure all grease, brake dust, and grime are removed. Sanding the surface provides a better anchor for the paint.

Sprayed too close to the surface or applied too heavily. Allow adequate drying time between coats and maintain the recommended spray distance.

The can may not have been shaken sufficiently, or the paint was applied in inconsistent thicknesses. Ensure proper shaking and even coat application. Ensure full cure before exposing to elements.