Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For previously painted surfaces, a primer may be necessary depending on the condition and type of existing paint.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller. Typically, two coats are recommended for best results. Allow adequate drying time between coats as per the manufacturer's instructions (usually 2-4 hours for recoating).
Compatibility: Suitable for interior and exterior use on walls, woodwork, metalwork (including radiators and pipes), floors, stairs, skirting boards, and kitchen units. It can be used over existing oil-based paints (after proper preparation) and on properly primed surfaces.
Care: The eggshell finish is washable. Clean spills and marks promptly with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners or scouring pads that could damage the finish.