Timco Counter Flap Hinges - Satin Chrome

The hinges are manufactured from high-quality extruded solid brass, and the pins are also made of brass.

Yes, fixings are included. Each pair of hinges requires 12 CSK screws (4.0 x 25mm).

Each pair of hinges can support a maximum door weight of 10kg.

Corrosion Rating 4 indicates suitability for urban and industrial areas, including those with a moderate salt atmosphere, meaning they offer good protection against rust in such environments.

While they have a good corrosion resistance rating suitable for industrial areas, they are primarily designed for counter flap applications, which are typically indoors. For direct outdoor exposure, specific weatherproofing considerations would be needed.

Clean the hinges with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.

The hinges measure 100mm (4 inches) in length and 40mm in width, with a thickness of 2.50mm.

Apply a small amount of silicone-based lubricant to the hinge pin. Ensure no debris is obstructing movement.

Verify that the total weight of the counter flap does not exceed the 10kg maximum per pair. Check for any obstructions or binding during movement.

Retighten the screws gently. If the wood/material is stripped, consider using slightly larger screws or wood filler for a secure reattachment.

Clean the affected area with a soft damp cloth. While highly corrosion-resistant, extreme conditions might require more frequent cleaning. Ensure cleaning agents are non-abrasive.