Best current price£10.78from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£10.78Visit shop Perry Heavy Brenton Padbolt 200Mm (8") No.1a - Galvanised
Visit shop
B&Q£13.99Visit shop B&Q - Perrys 8In (200mm) Heavy Brenton Padlock Bolts With FixingsGalvanised
Visit shop4 offers from £10.78 - £13.99
View price history by clicking the chart icon.
The Perry Heavy Brenton Padbolt is designed for robust security on heavy-duty gates and doors, offering dependable safeguarding for valuable outdoor assets like wheelie bins and garden equipment. Its key benefit lies in its durable, galvanised construction and substantial 200mm size, ensuring long-lasting performance and strong locking capabilities. A potential caveat is its size, which may be more than needed for smaller applications.
| Colour | Silver |
|---|---|
| Model Part Number | 1A--PP0200GV |
| Brand | Perry |
You should use a padlock with a shackle diameter that fits through the hole in the padbolt and strike plate when secured. The width of the padlock itself should also be considered to ensure it doesn't obstruct the gate or door.
No, the Perry Heavy Brenton Padbolt is supplied without a padlock. A separate padlock is required for securing the mechanism.
While it can be used internally, it is primarily designed and built for heavy-duty outdoor applications due to its robust construction and galvanised finish.
Basic tools such as a drill, appropriate screws or bolts for your mounting surface, and a screwdriver or wrench are typically required for installation.
The galvanised coating provides excellent resistance to rust and weather damage, making it suitable for prolonged outdoor use. However, in extremely harsh environments or if the coating is significantly damaged, some corrosion may eventually occur.
The padbolt is 200mm (approximately 8 inches) in length.
Ensure the gate/door and frame are properly aligned and not warped. Clean any accumulated dirt or debris from the bolt and strike plate. Apply a small amount of lubricant to the sliding mechanism.
Verify that the mounting surface is solid and appropriate for the fixings used. If mounting on wood, ensure the pilot holes are the correct size. For harder surfaces, use suitable anchors or bolts.
Check that the padlock's shackle diameter is compatible with the aperture on the padbolt and strike plate. Ensure the padbolt is fully extended and correctly seated in the strike plate.
Setup: Installation requires basic tools such as a drill, appropriate screws or bolts (depending on mounting surface), and a screwdriver or wrench. Position the padbolt body on the gate or door and the strike plate on the frame, ensuring they align correctly when closed. Mark the mounting holes, drill pilot holes, and then securely fasten the padbolt and strike plate using your chosen fixings. Finally, the padbolt slides into the strike plate, ready to accept a padlock.
Compatibility: This padbolt is compatible with any standard padlock that fits through the 200mm bolt and the corresponding aperture on the strike plate. It is designed for mounting on wooden, metal, or composite gates and doors.
Care: To maintain optimal performance, periodically clean the padbolt with a damp cloth to remove dirt and debris. Check the sliding mechanism for smooth operation and lubricate sparingly if necessary, especially after prolonged exposure to harsh weather. Ensure the galvanised coating remains intact; touch up minor abrasions with a suitable metal paint if needed to prevent rust.
