Ogee Fascia Corner - 300mm

Corner trims are essential for concealing the 10mm expansion gap required between two plastic fasc...

Best current price£3.74from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Professional Building Supplies£3.74Visit shop

Freefoam White Ogee Fascia Corner - 300Mm

Visit shop

All Offers

2 offers from £3.74

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam White Ogee Fascia Corner - 300Mm

Free delivery in 1–3 days

£3.74

Visit shop

PVC Cladding UKFreefoam White Ogee Fascia Corner - 300Mm

Free delivery in 1–3 days

£3.74

Visit shop

Product Information

Full details

The Ogee Fascia Corner is designed for professional builders and DIY enthusiasts who need a reliable way to finish eaves installations with 10mm fascia boards. Its primary benefit is the seamless concealment of essential expansion gaps at corners, protecting the integrity of your roofing system. The main caveat is that users must correctly apply adhesive and sealant to manage thermal movement, as rigid installation can lead to potential board distortion over time.

All features

Model Part Number	FOX
Brand	PBSL Group

Extended Product Information

FAQs

Is this corner compatible with all fascia boards?

It is specifically designed for 10mm thick fascia boards. Ensure your system meets this specification.

Can I use standard wood glue?

No, you must use a suitable high-quality plastic adhesive and low-modulus silicone for long-term weatherproofing.

What is the purpose of the 10mm gap?

The gap allows the fascia boards to expand and contract due to temperature changes without causing the system to warp.

Can these be painted?

These are intended to be maintenance-free and are generally not designed for painting. If you must paint, use a primer suitable for plastic.

How do I ensure a weather-tight seal?

Apply a generous, consistent bead of low-modulus silicone on the side designated to allow for movement.

Troubleshooting

Corner piece is bowing or distorting

Check if both sides were glued; you must leave one side free with silicone to allow for thermal movement.

Visible gap between the corner and the fascia

Ensure the fascia boards are cut square and that the expansion gap does not exceed the recommended 10mm allowance.

Rough edges after cutting

Use a fine-grit sandpaper or a metal file to smooth the cut edge after trimming with a hacksaw.

Pros and Cons

Pros

Seamlessly hides unsightly 10mm expansion gaps
Durable, weather-resistant plastic material
Easy to cut and install with standard tools
Enhances the visual appeal of roofline eaves
Designed specifically to accommodate thermal movement

Cons

Requires specific application of both glue and silicone
Non-flexible plastic may scratch if handled roughly
Cannot be installed as a structural component

Setup, Compatibility & Care

For installation, ensure you have a fine-toothed saw to prevent splintering the plastic edges. If you need to cut the 300mm length, mark your line clearly with a pencil and use a steady hand. Compatibility is limited to standard 10mm fascia systems, so verify your board thickness before purchase. Regarding care, the fascia corners are largely maintenance-free. If they become dirty over time due to weather exposure, clean them with a soft cloth and a mild soap-and-water solution; avoid abrasive scourers or harsh chemical solvents that might damage the surface finish.