Best current price£17.15from RS Components Ltd- UK
Shopping.co.uk recommended and popular offers
RS Components Ltd- UK£17.15Visit shop Schneider Electric RXG Series, 24V dc DPDT Interface Relay, DIN Rail
Visit shop2 offers from £17.15 - £25.40
View price history by clicking the chart icon.
This Schneider Electric RXG Interface Relay (RXG22BDPV) is designed for industrial automation professionals needing reliable pre-assembled interface solutions. Its key benefit is providing 2 CO contacts with integrated diode protection for safe PLC interfacing. A potential caveat is its specific 24VDC operating voltage, requiring careful power supply matching. This module simplifies control panel wiring with its lockable test button, LED indicator, and secure screw terminal connections.
| Series | RXG |
|---|---|
| Model Part Number | RXG22BDPV |
| Brand | Schneider Electric |
The integrated diode protects the relay coil and the control circuit (e.g., PLC output) from damaging voltage spikes generated when the coil is de-energized (back EMF).
No, this relay is specifically designed for 24VDC coil operation. Using an AC signal can damage the relay.
Each of the 2 CO contacts is rated for a maximum of 5A.
You can manually energize the relay using the lockable test button. Push the button to energize the coil. It can be locked in the energized or de-energized state for testing or maintenance.
IP20 means the relay is protected against solid objects greater than 12.5 mm (like fingers) and has no special protection against water. It should be installed in an environment protected from water ingress.
It meets IEC, UL, CSA, and RoHS standards, indicating broad international compliance and suitability for various global markets.
No, this relay is specifically designed for a 24VDC coil voltage. Using a different voltage may result in malfunction or damage.
Verify the control voltage is exactly 24VDC. Check wiring connections to the coil terminals (A1/A2). Ensure the control signal is present and of the correct polarity. Confirm the test button is not locked in the off position.
Check for any residual voltage on the control input. Ensure the test button is not locked in the on position. Verify the coil is not shorted.
Ensure the relay is properly energized or de-energized. Check that the load current does not exceed the 5A rating. Inspect wiring to the contact terminals (0, 1, 2, 3, 4).
Verify the control voltage is applied to the coil. Check the wiring to the coil. The LED may be integrated with the coil circuit; if the relay functions but the LED does not, the LED itself might be faulty.
Setup:
Compatibility:
Care:
