Cornice Moulding Exterior - White - C832

The polyurethane material is water-resistant and suitable for exterior use, provided it is installed with proper adhesive and painted to seal the surface.

No. You should use a high-strength exterior-grade adhesive specifically formulated for polyurethane mouldings.

Yes, the product must be finished with exterior-grade paint to protect the polyurethane from UV light damage.

You can use a standard mitre box and a fine-toothed saw to achieve the necessary angles for corners.

While intended for exterior use, it can be used indoors, though its high-density material is specifically optimized for weather durability.

It is primarily attached using adhesive, though for overhead exterior installations, mechanical pins or nails may be used for additional security while the adhesive cures.

This usually indicates insufficient adhesive or thermal expansion movement. Ensure the joints are cleaned, re-bonded with flexible exterior sealant, and sanded flush.

Check that the surface is completely dry and free of dust or oils. Use a primer on porous surfaces like raw masonry before applying the adhesive.

If the paint is peeling, the surface may not have been properly primed. Sand the area, apply an exterior primer, and re-paint using high-quality outdoor paint.