Draper 12V DC-AC Inverter - 200W

You can use most AC appliances with UK 3-pin plugs, provided their combined power consumption does not exceed 200W continuously. You can also charge USB devices.

Yes, it is designed for use with any 12V DC source, such as a car battery or a power supply.

Modified sine wave is a type of output waveform that is suitable for most devices. However, some sensitive electronics may not function optimally with a modified sine wave.

The inverter has an overload protection feature. If overloaded, it will trigger an alarm and may shut down to prevent damage.

There is usually an indicator light on the inverter that shows when it is powered on and functioning correctly.

It depends on the refrigerator's power consumption. Check the refrigerator's specifications, and ensure it does not exceed 200W continuous power and 400W peak power.

The runtime depends on the battery capacity and the load on the inverter. Monitor the battery voltage to avoid complete discharge.

Warranty information is not available in the provided product data.

Check the 12V DC connections to ensure they are secure and correctly connected. Check the vehicle's battery and fuses. Ensure the power switch on the inverter is in the 'on' position.

Check the total power consumption of the connected devices. Ensure it does not exceed 200W continuous power. Also, check the fuse on the inverter and replace if blown.

Reduce the load by disconnecting some devices. The inverter is designed to protect itself from overloads.

Ensure the USB cable is properly connected. Check the device's charging requirements to ensure compatibility.