Muriva Wallpaper - Grey

Use a high-quality, ready-mixed adhesive specifically designed for heavyweight vinyl wallpapers. Always follow the adhesive manufacturer's instructions.

While the wallpaper is wipeable, it is not recommended for very high-moisture areas like steamy bathrooms or kitchens. Ensure good ventilation if used in a low-moisture bathroom.

Gently wipe the mark with a clean, damp cloth. For tougher marks, use a cloth slightly dampened with a mild soap and water solution, then wipe with a clean damp cloth and dry.

The product specifications indicate dimensions of H:53.0 x W:8.0 x D:8.0 cm, suggesting a standard roll size with these approximate measurements when packaged.

The distressed texture is part of the design and should be consistent within manufacturing batches. However, slight variations can occur, which is typical for textured wallpapers.

The wallpaper comes with a 1-year guarantee.

This particular wallpaper is designed for a paste-the-paper application. Pasting the wall may not yield optimal results or adhesion.

Ensure the correct type and amount of wallpaper adhesive is used. Re-check that the wall surface is clean, dry, and properly prepared. Allow sufficient booking time for the paste.

Carefully lift the edge of the affected strip and re-smooth the wallpaper using a wallpaper brush or smoothing tool, working from the center outwards. For small, persistent bubbles, a pin prick might allow air to escape.

Ensure the wallpaper is hung with consistent lighting. Check that the paste application was even and that no paste residue remains on the surface after wiping. The inherent nature of metallic foils can create varied light reflection.

Use a slightly more damp cloth with a very mild soap solution. Wipe gently and immediately dry with a clean cloth. Avoid excessive rubbing which could damage the finish.