Makita Wood Drill Bit Set - 5 Piece Brad Point - D-72861

These bits are designed for use on various types of wood, including softwoods and hardwoods. However, they may not be suitable for engineered wood products.

No, these bits are designed for wood only. Using them on metal will likely damage the bits and result in poor performance.

The brad point helps to center the bit and prevents it from wandering, ensuring a straight and accurate hole.

The spurs are the sharp edges on the sides of the bit. They score the wood fibers as the bit cuts, resulting in cleaner entry and exit holes, and reducing tear-out.

These drill bits have a cylindrical shank, which is a straight, round shaft that fits into most drill chucks.

The set comes with a storage case designed to keep the bits organized and protected when not in use.

Yes, these bits can be used with a drill press for more precise and consistent drilling.

The lifespan of the bits depends on usage and care. Following the care instructions will help extend their life.

Ensure the brad point is centered and apply consistent pressure. If the issue persists, check that the drill bit is properly secured in the chuck and consider using a drill press for greater accuracy.

Adjust the drilling speed and feed rate. Use a piece of scrap wood as backing to prevent tear-out on the exit side of the hole.

Check for any damage to the cutting edges. Try sharpening the bit or replacing it if it is excessively worn.