Hansgrohe Pulsify Select S Shower Kit - 105mm, 3-Jet, 125cm Hose, Matt Black

PowderRain provides a soft, mist-like spray for relaxation. IntenseRain offers a more vigorous, full-bodied stream for rinsing. Massage spray delivers targeted pulses of water to relieve tension.

Use a soft, damp cloth and mild soap if necessary. Rinse thoroughly and dry. Avoid abrasive cleaners or scouring pads.

The Hansgrohe Pulsify Select S Shower Kit comes with a 5-year manufacturer's guarantee.

Yes, this shower kit uses standard connections, so you can replace the 1.25m hose with a longer one if desired, provided it also has standard fittings.

The kit requires a minimum water pressure of 1 bar. While it will function at this pressure, performance, especially the intensity of spray modes, is best at higher pressures.

The Porter S shower support is fixed in position once mounted to the wall. Its height is determined during installation.

Check for kinks in the shower hose. Ensure the water inlet filter on the shower head is clean. Verify that your home's water pressure meets the minimum requirement (1 bar).

Ensure the Select button is pressed firmly. If the button feels stiff or unresponsive, check for any debris obstructing its movement and clean around the button area.

Ensure all threaded connections are tight and properly sealed. If the leak persists, check the rubber washer within the connection and replace if damaged.

This is normal for some spray modes. Allow a few minutes for the shower head to fully drain. Ensure the shower is in the 'off' position at the valve.