Varilight Double Toggle Light Switch - Screwless Primed Ready To Paint - White

You can use most standard interior emulsion paints. For best results, ensure the surface is clean and dry, and consider using a suitable primer for your chosen paint type. Always follow the paint manufacturer's guidelines.

The faceplate is designed to clip on and off. Gently pull the edge of the faceplate away from the switch unit. It should release easily.

The faceplate is primed and paintable. The switch covers and control knobs typically come in pre-finished options like chrome, polished brass, or iridium black and are not designed to be painted.

The dimensions are approximately 36mm (depth) x 86mm (height) x 86mm (width).

Yes, the socket inserts are available in either black or white to help match your color scheme.

While this is a toggle switch, ensure compatibility if you are using it with dimmable LEDs. For dimming functions, a dedicated Varilight dimmer switch would be required, and LED compatibility should be checked for that specific dimmer model.

This is a double toggle switch, meaning it can control two separate lighting circuits independently.

Verify that the power supply is switched on at the mains and that all wires are correctly and securely connected to the appropriate terminals.

Ensure the switch unit is correctly mounted in the wall box and that no wires are obstructing the clip mechanism. Check for any damage to the clip points on the faceplate or switch.

Ensure the faceplate was clean and dry before painting, and that appropriate primer and paint were used. Apply thin, even coats and allow sufficient drying time.

Ensure the switch is compatible with the type of bulbs being used (e.g., LED compatibility). Check wiring connections for the dimmer function specifically.