Origin Storage Memory - RDIMM 2Rx4 ECC 1.2V

This is a 288-pin RDIMM (Registered DIMM) designed for servers and desktops. Laptops typically use SODIMMs (Small Outline DIMMs), which are physically different and may not be compatible. Please check your laptop's specifications for compatible memory types.

RDIMMs (Registered DIMMs) have a register chip that buffers command and address signals, reducing the electrical load on the memory controller and allowing for higher memory capacities and densities. UDIMMs (Unbuffered DIMMs) do not have this register and are typically found in consumer desktops and laptops.

ECC (Error-Correcting Code) memory is recommended for servers, workstations, and critical applications where data integrity is paramount. It helps prevent data corruption by detecting and correcting memory errors. For standard consumer use, ECC is usually not required.

Consult your computer or server's motherboard manual or the manufacturer's support website. Look for specifications regarding supported memory types (DDR4), form factors (DIMM/RDIMM), speeds (MHz), and capacities (GB).

'2Rx4' refers to the memory module's organization. '2R' means it is dual-rank, and 'x4' means it uses four memory chips per rank. This configuration can sometimes offer performance benefits compared to single-rank or x8/x16 configurations, especially in server environments.

Origin Storage memory solutions come with a lifetime warranty.

It is generally not recommended to mix RDIMMs and UDIMMs, as they have different electrical characteristics and may cause system instability or prevent booting. Always use modules of the same type within a system, and consult your motherboard's manual for specific mixing guidelines.

Verify the memory module is fully seated in the correct slot. Check the system's documentation for specific slot population order. Ensure the motherboard and CPU support DDR4 ECC RDIMMs. Try testing the module in a different compatible system if available.

Confirm the memory module is correctly recognized in the BIOS/UEFI. Check if the operating system has memory limitations (e.g., 32-bit OS). Ensure all modules are properly seated and compatible with the system.

Run a memory diagnostic tool (e.g., MemTest86+). Ensure adequate system cooling. Verify the voltage and speed settings in the BIOS/UEFI match the module's specifications. If multiple modules are installed, test them one by one to isolate a potentially faulty module.

ECC errors can indicate a faulty memory module or a problem with the memory controller. Run a thorough memory diagnostic. If errors persist, consider replacing the module. Ensure the system firmware is up-to-date.