Features & Benefits: Side Entry WC Fill Valve. Airgap compliant to AUK1 and Reg 4 as standar...Features & Benefits: Side Entry WC Fill Valve. Airgap compliant to AUK1 and Reg 4 as standard. Meets requirements of the Water Supply (Water Fittings) regulations. Easy installation and maintenance. Brass shank. Connection Size: 1/2". Precision Water Control Performance - Built for water flow, the Torbeck fill valve ensures efficient cistern operation across varying pressure levels, delivering performance and optimized fill cycles. Wide Pressure Range Compatibility - Designed to operate across 0.1–10 bar, this fill valve adapts to low- and high-pressure systems, making it ideal for diverse cistern and header tank applications. Quiet Fill Technology – Advanced low-noise design minimizes turbulence during water flow, ensuring a quiet and controlled fill cycle, ideal for noise-sensitive environments and modern cistern systems. Easy Installation - Compatible with standard inlet configurations, this compact fill valve supports installation and replacement, ensuring a leak-free fit across multiple cistern setups. Adjustable Height & Water Level Control - Features flexible height adjustment and float-based control, allowing precise water-level tuning over a 70mm range for performance and water management., Manufacturer: Fluidmaster
Fluidmaster Brass Torbeck Fill Valve Side Entry, Wc Cistern Water Fill Valve With Quiet Fill Technology, Adjustable Height, 0.1–10 Bar Pressure Range, Easy Installation & Reliable Flow Control
AmazonFluidmaster Brass Torbeck Fill Valve Side Entry, Wc Cistern Water Fill Valve With Quiet Fill Technology, Adjustable Height, 0.1–10 Bar Pressure Range, Easy Installation & Reliable Flow Control
The Torbeck Side Entry Fill Valve is designed for plumbers and DIY enthusiasts seeking a reliable and efficient solution for cistern refilling. Its key benefit is precision water control across a wide pressure range, ensuring optimized fill cycles and quiet operation. A potential consideration is the specific connection size, requiring confirmation for your existing setup. This valve offers advanced features like airgap compliance, easy installation, and adjustable water levels, making it a versatile choice for various toilet cistern applications.
All features
Model Part Number
720U-071-P25
Brand
Torbeck
Extended Product Information
FAQs
What is the connection size for this fill valve?
The Torbeck Side Entry Fill Valve has a 1/2" brass shank connection.
What is the operating pressure range for this valve?
The valve is designed to operate effectively across a wide pressure range of 0.1 to 10 bar.
How do I adjust the water level in the cistern?
You can adjust the water level by altering the height of the valve and positioning the float arm. There is a flexible height adjustment and float-based control allowing tuning over a 70mm range.
Is this valve compliant with UK water regulations?
Yes, this valve is airgap compliant to AUK1 and Reg 4 as standard, meeting the requirements of the Water Supply (Water Fittings) regulations.
How can I reduce noise from my cistern filling?
This valve features Quiet Fill Technology, an advanced low-noise design that minimizes turbulence during water flow, ensuring a quieter fill cycle.
What maintenance does this fill valve require?
Generally, minimal maintenance is required. Periodically check for leaks. If needed, the valve can be removed and its internal components rinsed with water to clear sediment. Avoid abrasive cleaners.
Can I install this valve myself?
Yes, the valve is designed for easy installation and maintenance with compatible standard inlet configurations. Basic plumbing knowledge is recommended.
Troubleshooting
Cistern not filling
Check that the main water supply is turned on. Ensure the water supply hose is securely connected to the valve. Verify that the float arm is not obstructed and is set to allow water entry.
Cistern overfilling
Adjust the float mechanism downwards or reduce the height of the valve. Ensure the float arm is moving freely and the shut-off mechanism is engaging correctly at the desired water level.
Valve is constantly leaking or running
Inspect the diaphragm or seal inside the valve for damage or debris. Clean the valve's internal components. Ensure the valve is correctly seated and tightened. If the issue persists, the valve may need replacement.
Noisy filling
While designed for quiet operation, extreme pressure fluctuations or partial blockages can cause noise. Ensure the water pressure is within the operational range. Check for any debris in the inlet or within the valve mechanism.
Low water level in cistern
Adjust the float mechanism upwards or increase the height of the valve. Ensure the float is correctly positioned to maintain the desired water level for optimal flushing.
Pros and Cons
Pros
Complies with critical water regulations (AUK1, Reg 4)
Operates reliably across a broad water pressure spectrum (0.1-10 bar)
Significantly reduces noise during the filling process
Simple to install and maintain, reducing service time
Durable construction with a brass shank for longevity
Allows for fine-tuning of the water level for optimal performance
Cons
Requires a specific 1/2" connection size, which may necessitate adapters for older systems
The brass shank, while durable, adds weight compared to plastic alternatives
Advanced features might be overkill for very basic cistern setups
Instruction clarity for fine adjustment may vary for novice users
Setup, Compatibility & Care
Setup:
Ensure the water supply to the toilet cistern is turned off.
Remove the old fill valve from the cistern.
Thread the 1/2" brass shank of the Torbeck valve through the inlet hole from inside the cistern.
Secure the valve from the outside using the provided nut, ensuring a snug fit but avoiding over-tightening.
Connect the water supply hose to the valve's inlet.
Adjust the valve height and float arm to the desired water level (approximately 15-20mm below the overflow pipe, adjustable over a 70mm range).
Turn the water supply back on and check for leaks. Allow the cistern to fill and test the flush.
Compatibility:
Connection Size: 1/2" inlet connection. Ensure your existing water supply pipe has a compatible fitting.
Water Pressure: Suitable for systems operating between 0.1 and 10 bar.
Cistern Types: Designed for standard toilet cisterns with a side-entry fill valve requirement.
Care:
Periodically check for leaks around the connection points.
If performance degrades, the valve can be easily removed for cleaning. Rinse the internal components under running water to remove any sediment. Do not use abrasive cleaners.
The float and height adjustment mechanism should be kept free from debris to ensure accurate water level control.