Portable 12V Oil Transfer Pump - EAFC
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The EAFC Portable 12V Oil Transfer Pump is an essential tool for vehicle owners and DIY mechanics who frequently perform their own oil changes or fluid maintenance on cars, motorcycles, and boats. This robust, 100W electric gear pump provides a high-efficiency solution for transferring engine oil and fuel, significantly reducing the mess typically associated with manual draining. While it offers excellent portability and power, users should note that the device requires a stable 12V power supply to maintain its optimal flow rate, and it is strictly intended for non-corrosive liquids only.
All features
| Brand | EAFC |
|---|
Extended Product Information
FAQs
Can I use this pump for water?
No, this pump is designed exclusively for non-corrosive liquids such as engine oil and diesel. Pumping water can damage the internal components.
How long can I run the pump continuously?
The pump is designed for a 30-minute continuous work cycle. Continuous use beyond this may cause the motor to overheat.
Does this pump work with a 24V battery?
No, it is specifically engineered for 12V DC power. Using higher voltage can damage the motor.
Is it safe to use this to pump gasoline?
Absolutely not. This pump is not designed for highly flammable or volatile fluids like gasoline.
Why does the suction decrease after a few minutes?
It may be due to a drop in voltage from your power source or a blockage in the intake tube. Check your battery charge and the hose for debris.
Do I need to prime the pump before use?
While it is a self-priming gear pump, ensuring the intake hose is clear and properly inserted helps the pump achieve flow more quickly.
Troubleshooting
Pump is running but not extracting fluid.
Check that the intake tube is fully submerged in the fluid and that there are no air leaks at the hose connections.
Pump speed is slow or suction is weak.
Ensure your 12V power source is fully charged. Low battery voltage is the most common cause of reduced pump efficiency.
Pump stopped mid-operation.
The pump may have exceeded its 30-minute duty cycle. Allow the motor to cool down completely before attempting to restart.
Pros and Cons
Pros
- Eliminates the need to climb under the vehicle for oil changes
- Compact and lightweight design for easy storage in a trunk or tool kit
- High-power 100W motor handles thicker oil effectively
- Designed for 30 minutes of continuous, reliable performance
Cons
- Requires a 12V power source, limiting use away from a battery
- Performance significantly degrades if the power supply is weak or undercharged
- Not suitable for corrosive or highly flammable fluids like gasoline
- Requires careful adherence to safety protocols regarding water and moisture
Setup, Compatibility & Care
To set up the pump, connect the leads directly to a 12V battery, ensuring the positive (red) and negative (black) clamps are securely attached. Always verify your battery is fully charged before starting, as low voltage will impede the pump's speed and suction power. Compatibility is limited to engine oil, diesel, and non-corrosive fluids; never use the pump for water, transmission fluid, or gasoline. After use, allow the pump to cool, clean the exterior with a dry cloth, and store it in a dry environment. To protect the motor, never operate the device with wet hands, while barefoot, or while standing in any water or damp areas to prevent electrical hazards.