Tiletastic Grey Wood Effect Self-Adhesive Vinyl Floor Tiles - HSD - Tiletastic

Each pack contains 20 tiles and covers approximately 20 square feet.

Yes, the water-resistant surface makes them suitable for moisture-prone areas like bathrooms and kitchens.

No, these are self-adhesive tiles. You will need a sharp utility knife and a measuring tape for cutting and planning.

They can be installed on any smooth, hard, and non-porous surface, such as existing vinyl, linoleum, tile, or sealed wood subfloors.

Wipe up spills immediately. Clean with a mild soap and water solution and a soft mop or cloth. Avoid abrasive cleaners.

Yes, their peel-and-stick nature makes them a non-permanent flooring solution, which is often ideal for rental properties.

Each tile has a thickness of 0.9cm.

Ensure the subfloor is perfectly clean, dry, and smooth. Reheat the adhesive side lightly with a hairdryer on a low setting and press firmly again.

Gently lift the tile before the adhesive sets and re-lay it, smoothing from the center outwards. If already set, try to carefully puncture the bubble with a pin and press flat.

Check that each tile is aligned correctly with the previous one. Ensure the subfloor is level. For significant subfloor issues, consider a leveling compound before installation.

Use a sharp, fresh utility knife blade. Score the tile multiple times along a straight edge rather than trying to cut through in one pass.