Rust-Oleum Furniture Paint - Grey - 750ml

Yes, Rust-Oleum Furniture Paint can be used on laminate furniture, provided the surface is clean, dry, and lightly sanded to create a key for adhesion. Priming may also be beneficial for optimal results.

For the smoothest finish, use a high-quality synthetic brush for cutting in edges and a short-nap roller for larger surfaces. Apply in thin, even coats, maintaining a wet edge to avoid lap marks.

The number of coats required will depend on the surface and the existing color. Generally, two to three thin coats provide the best coverage and finish.

It can be used on interior kitchen cabinet doors and frames. However, for surfaces that receive heavy moisture or frequent wiping, consider applying a clear matt topcoat for added durability.

While it can paint tabletops, it is not designed for high-traffic surfaces like tabletops that require extreme durability against scratches and spills. For tabletops, it's recommended to use a protective clear topcoat designed for furniture.

Allow approximately 2 hours between coats, but this can vary based on temperature and humidity. Ensure the previous coat is touch-dry before applying the next.

Clean brushes, rollers, and any spills immediately after use with soap and water.

Ensure paint is thoroughly stirred. Apply thin, even coats rather than one thick coat. Check for consistent brush/roller strokes. Ensure the surface is properly prepared and primed if needed.

The surface may not have been properly cleaned or sanded. Re-clean and lightly sand the surface, then reapply. Ensure you are using a suitable primer if painting over a difficult surface.

Drying times can be affected by humidity and temperature. Ensure adequate ventilation and avoid applying in very damp or cold conditions. Allow extra time for full curing.

Ensure the paint is stirred adequately. If a sheen is appearing, it might be due to excessive thinning or incompatible primer. Test on an inconspicuous area.