Direct Flow Reverse Osmosis Unit - Calmag - RO-CALRO-DIRECT-FLOW

Filter change frequency depends on water usage and water quality, but the smart tap's automatic maintenance warning will notify you when it's time, typically every 6-12 months for standard filters.

The main benefit is that it produces purified water on demand without a storage tank, ensuring fresher water and saving space, unlike traditional RO systems.

Yes, the advanced Reverse Osmosis technology used in this unit is highly effective at removing fluoride, nitrates, and over 1000 other common and uncommon contaminants.

Most direct flow RO systems require electricity to power the pump that ensures adequate pressure for direct flow. Please refer to the product's specific technical specifications.

The leak sensor is a safety feature that detects water leaks. Upon detection, it can automatically shut off the water supply to the unit, preventing potential water damage to your home.

The smart tap is equipped with sensors that monitor filter performance and lifespan. When a filter is nearing the end of its effective life, the control warning lights on the tap will illuminate to alert you.

Reverse Osmosis can slightly lower the pH of water, making it slightly acidic. However, the degree of pH change is typically minimal and safe for consumption.

Check if the cold water supply valve is fully open. Ensure filters are not clogged and require replacement. Verify that the drain line is not blocked.

This usually indicates that the RO membrane or carbon filters need to be replaced. Ensure all connections are secure and that no contaminants are bypassing the filters.

The warning light indicates a maintenance requirement, most likely a need to replace one or more filter cartridges. Refer to the user manual for specific light codes.

Immediately check all plumbing connections and filter housings for any signs of leakage. Tighten any loose fittings or replace seals as necessary. If the leak persists, shut off the water supply to the unit.