JRP Riveting Products Dome Head Rivets - 3.2 X 6mm - Silver
Discover the reliability of JRP Riveting Products with our 3.2 x 6mm Aluminium/Steel Dome Head Riv...Discover the reliability of JRP Riveting Products with our 3.2 x 6mm Aluminium/Steel Dome Head Rivets. Designed for durability and strength, these rivets are perfect for various metal joining applications. They feature high-quality aluminium and steel construction, are ideal for metal joining and fabrication, easy to install with standard tools, and corrosion-resistant for longevity. Perfect for DIY and professional use. Available in a box of 1000.
This guide is for DIY enthusiasts and professionals in metal fabrication seeking a reliable fastening solution. The JRP 3.2 x 6mm Aluminium/Steel Dome Head Rivets offer durability and strength for various metal joining tasks, ensuring a secure bond. While easy to install with standard tools, users should ensure they select the correct rivet size for their specific application to achieve optimal results.
All features
Colour
Silver
Model Part Number
JRPASD3206
Brand
JRP Riveting Products
Extended Product Information
FAQs
What is the difference between a dome head and a countersunk head rivet?
A dome head rivet has a rounded, slightly protruding head that provides a clean finish. A countersunk head rivet has a tapered head designed to sit flush within a pre-drilled countersunk hole, creating a smooth, flat surface.
Can these rivets be used for structural applications?
While these rivets offer good strength for general metal joining, they are typically used for non-structural or semi-structural applications. For critical structural joints, consult engineering specifications or use specialized fasteners.
What is the minimum and maximum material thickness these rivets can join?
The ideal grip range for a 6mm rivet is typically between 2mm and 4mm total material thickness. Exceeding the recommended grip range can compromise the joint's strength.
How many rivets are in a box?
This product is supplied in a box containing 1000 rivets.
Are these rivets paintable?
Yes, the aluminium and steel can be painted after proper surface preparation. Ensure the surface is clean and free of any oils or grease before applying primer and paint.
What kind of rivet gun do I need?
You will need a rivet gun designed for 3.2mm (1/8 inch) diameter rivets. This can be a manual hand riveter, a pneumatic (air-powered) riveter, or an electric riveter.
Troubleshooting
Rivet stem does not snap off.
Ensure the rivet gun is set correctly for the rivet size and that the gun has sufficient power. Check if the rivet stem is properly seated in the gun's jaws.
Rivet spins or is loose after installation.
The hole may be too large. Try using a slightly smaller drill bit next time, or consider using a larger rivet for the application if possible. Ensure the rivet gun was fully actuated.
Rivet head is not flush with the material surface.
This is normal for dome head rivets. For a flush finish, a countersunk rivet would be required. Ensure the materials are pulled tightly together before setting the rivet.
Pros and Cons
Pros
Strong and durable construction for secure joints.
Corrosion-resistant finish for extended lifespan.
Simple to install with common riveting tools.
Suitable for both aluminum and steel materials.
Cost-effective in bulk packaging.
Cons
Requires a specific rivet gun for installation.
Dome head may not be suitable for all aesthetic requirements.
Limited to specific material thicknesses based on rivet length.
Not designed for high-vibration environments without additional securing methods.
Setup, Compatibility & Care
Setup:
Ensure you have a compatible rivet gun (manual, pneumatic, or electric).
Select the appropriate drill bit size for creating the rivet holes. For 3.2mm rivets, a 3.3mm to 3.5mm drill bit is typically recommended.
Drill holes through the materials you intend to join.
Insert the rivet stem into the rivet gun.
Place the rivet through the aligned holes in the materials.
Squeeze the rivet gun handles firmly until the stem snaps off, securing the materials.
Compatibility:
Materials: Suitable for joining aluminium to aluminium, steel to steel, and aluminium to steel.
Tools: Requires a rivet gun capable of handling 3.2mm diameter rivets.
Care:
These rivets are corrosion-resistant, but prolonged exposure to harsh chemicals or saltwater environments may eventually affect their finish.
For optimal longevity in coastal or highly humid areas, consider applying a sealant around the rivet head after installation.
eBay£8.95Visit shop 
Debenhams£9.06Visit shop 
Amazon£10.31Visit shop 