Faithfull No.3 Finishing Plane - 45mm - 230mm

A No.3 finishing plane is primarily used for achieving a fine, smooth finish on wood surfaces, particularly after initial shaping or planing with coarser tools. It's ideal for final preparation before sanding or finishing.

The blade can be removed by loosening the lever cap. Sharpen it using a sharpening stone or honing guide, ensuring a consistent bevel. Reassemble and adjust for depth.

While suitable for all skill levels, beginners may need some practice to master the technique of using a hand plane for precise finishing. The solid construction and reliable adjustment make it a good tool to learn with.

The Faithfull No.3 Finishing Plane is suitable for both hard and soft woods, allowing for versatility in your projects.

The frequency of sharpening depends on usage and the type of wood. For best results, sharpen when you notice the plane is no longer cutting cleanly or requires excessive force.

The plane has a cutter width of 45mm and an overall length of 230mm.

Yes, with practice and careful adjustment, this plane can be used to create precise chamfers on edges.

Ensure the blade is sharp and properly set. Check the depth adjustment nut and increase the blade exposure slightly. Verify the sole of the plane is flat and clean.

The blade may be loose or dull. Tighten the lever cap and check the blade edge. Ensure the blade seating is clean and free from debris.

Clean the threads of the adjustment nut and screw. Apply a small amount of light machine oil if necessary. Ensure no debris is obstructing the mechanism.

This is rare due to precision grinding. If suspected, it may require professional lapping or flattening. Ensure the plane has not been dropped or stored improperly.