Best current price£24.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£24.00Visit shop Sadolin Quick Dry 10 Year Jacobean Walnut Woodstain 1L
Visit shop
B&Q£24.10Visit shop B&Q - Quick Dry Uv Protection Woodstain Jacobean Walnut 1L
Visit shop4 offers from £24.00 - £24.10
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and homeowners looking to protect and enhance interior and exterior wood surfaces. The Sadolin Quick Dry Woodstain in Jacobean Walnut offers a fast-drying, durable finish with up to 10 years of protection and UV resistance, allowing projects to be completed efficiently. A key caveat is that it is not suitable for decking.
| Colour | Brown |
|---|---|
| Model Part Number | 5101401 |
| Brand | Sadolin |
No, Sadolin Quick Dry Woodstain is not suitable for use on decking.
The woodstain provides up to 10 years of durability and protection when applied correctly.
It is a quick-drying formula, allowing for recoating within a few hours. Always refer to the product can for specific drying times based on conditions.
This product is specifically designed for wood surfaces only.
Clean the stained surface periodically with a mild detergent and water. Avoid abrasive cleaners.
Ensure the wood is clean, dry, and free from dust. Lightly sand if necessary. Apply Sadolin Quick Drying Woodstain directly as the base coat.
Jacobean Walnut is a rich, warm brown tone that enhances the natural grain of the wood with a translucent finish.
Ensure the woodstain was thoroughly stirred before and during application. Apply thin, even coats, avoiding over-application in any one area. Check that the surface was properly prepared and that previous finishes were removed if necessary.
Verify that the temperature and humidity conditions are within the recommended range for application. Ensure coats were not applied too thickly. Check for any incompatible finishes on the wood surface.
The surface may not have been adequately prepared or cleaned prior to application. Ensure all dirt, grease, and loose material were removed. If the wood was previously painted or varnished, it may need to be fully stripped back to bare wood.
Preparation: Ensure wood surfaces are clean, dry, and free from dust, grease, and loose particles. Lightly sand rough or previously coated surfaces. For bare wood, apply Sadolin Quick Drying Woodstain as the base coat. For previously treated wood, ensure the old finish is sound or remove it entirely.
Application: Stir the woodstain thoroughly before and during use. Apply evenly with a good quality brush or roller. Two thin coats are generally recommended for best results, especially for exterior use. Allow adequate drying time between coats as per the manufacturer's instructions.
Compatibility: Suitable for most wood types for both interior and exterior use, with the exception of decking. Not recommended for direct contact with food.
Care: Clean application tools with water immediately after use. To maintain the finish, clean the stained surface periodically with a mild detergent and water. Avoid abrasive cleaners.
